Jump to content
Georgia Pressure Washers

Help with Pump Problem

Recommended Posts

Joshua,

I have experienced the same issue at times. Usually it's due to air trapped. I use a drop stick so while the pump is on, I move the  stick  up and down in the  mix tank forcing mix into the hose. This is  more than enough to get the pump primed  and running. If that does not do  it, I  look for kink in my output hose. That more times than not is the problem.

I love my 12V!

Ray

Rhodysoftwash.com

Share this post


Link to post
Share on other sites

Thanks for the help Chris and Ray. I appreciate having a place to go for help and guidance. I ended  up taking pump apart and it had two small pieces of pvc that broke off and wedged themselves between the two small balls inside the pump.

I am glad you found out what was wrong Josh.  These are pretty reliable pumps

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...