Search the Community

Hello RCIA Family! We have some Titan Full Frame Aluminum Hose Reels with Stainless Steel Manifolds on special. These reels will last a decade or more if you rinse. Like anything, the better you care for it the longer it will last. These reels will hold 450' of 3/8" ID hose, 325' of 1/2" ID hose and 225' of 5/8" hose. They have the 1/2" Super Swivels with grease-able zerk fittings instead of the stock Titan swivels. The cost is $305 each for the 4318S-SS. We also have a reel gathering dust that has a 1" black iron manifold (not suitable for corrosive chemcials) which is ideal for those needing a high flow water supply reel. It is an 18" Aluminum Full Frame hose reel with a 1" Super Swivel featuring a grease-able zerk fitting and 1" manifold (4018-6). The cost on the reel is $355. This is an ideal reel for a 1" water supply hose for guys needing to fill a tank fast, for rinse hose storage, for guys using a 1" AODD pump and for 8 gpm and up pressure washer users. If you are interested in these reels or in other models at RCIA discounted, non-advertised prices, give me a call or email me directly. Our number is (800) 519-9279 or (727) 562-5488 and email me at Lori@PressureWasherProducts.com If I can figure out how to make a coupon code, I will list it on the site for my RCIA buddies! Make sure you order a street 45 in brass for low pressure or steel for high pressure to install on the drum of the reel so that the hose doesn't stick out at the connection. I will also make up low pressure jump hoses with crimped on hose ends in 316 Stainless Steel, SCH 80 Grey PVC, or brass in lengths up to 30 feet for the cost of $10 each! Choose from Yellow Ag hose, Flex Tech RT and Kuri Tec hose rated "A" for use with softwash chemicals. If you need a different reel, we are Hannay Dealers! Yes, we can hook you up with another American Made hose reel by Hannay or Titan! Note: Pressure Washer Outlet on unloader should ALWAYS be a plug and NOT the coupler PWP Titan Hose Reel Guide.pdf Reel Dimensions.pdf Reel Parts Lists.pdf

Hello, RCIA! Do you want more information on buying a pressure washer for softwash rinsing, high pressure cleaning, downstreaming and sidewalk cleaning in both hot or cold water? We proudly offer Alkota, AaLadin, Pressure-Pro, BE Pressure, Hurricane and a few others. More importantly, we help you choose the unit best suited to your specific needs. We ask you an array of questions to help you arrive at an informed decision. PWP ships all over the world, offers all of the plumbing diagrams and products to plumb your rig properly to maximize your cleaning units and investment. Our Pump Guru, Rex, is available 24/7 for technical assistance for free. Rex is highly regarded by manufacturers of pressure washers, high pressure components and the related industries. Rex is sought after for his input into the research and development of high and low pressure equipment. We also invite you to our facility to assist us with the installation of your pressure washer and soft wash system. Customers have flown in from outside the US to assist us with their rig assembly. Every single customer that assists with their rig installation reports that they can't believe how much they learned about their equipment by spending time with Rex. They report that the experiences with us, was one of the best! They also save money by reducing the hourly cost. Mover the years, we have learned that an efficient combination for a softwash and pressure wash rig is a 1/2" 17 GPM All-Flo Air Diaphragm Pump (or larger), an 8 gpm pressure washer ($3150) paired with a 19" ($575) or 24" Whisper Wash Surface Cleaner with up an sized 3/8" hose. The 1/2" All-Flo shoots 30-60' and can be rinsed with the 8 gpm pressure washer using a large (over 50 orifice) nozzle or even better the new adjustable M5D5 nozzle for $65! Extra money can be picked up using the surface cleaner to quickly clean driveways, sidewalks and patios! We recommend that you plumb your pressure washers using non-collapsible hose remembering to double the hose ID compared to the inlet of your pump. The 8 gpm pumps need 1.5" suction hose and a 1.5" 80 mesh Y-Strainer. To prevent re-occurring problems to the pump, use a 1/2" ID high pressure hose from the outlet of the unliader to the hose reel and use 1/2" ID high pressure hose for the first 50 feet. Be sure to ask for the 3/8" high pressure hose on your surface cleaner. We look forward to educating you on the available equipment to best suit your needs and share in your excitement of helping you to install the best high pressure and softwash products available at the best prices! We also offer financing through a handful of companies that are easy to work with! Email or call us!