Jump to content

Recommended Posts

garyw   

Master Industries LLC. Talk to Barry and tell him I told you to call. Make sure he knows you are a RCIA member

Share this post


Link to post
Share on other sites

I have done some pressure washing on the side for the past few years. I am ready to take it full time with a buddy of mine and want to build a system. Is there someone that can provide me with a full list of materials and solutions to get me up an running? 

I plan on doing mostly houses/fences/decks until I get going decent.  Then will move to add roofs in the mix.

thanks in advance. 

Bridger

Share this post


Link to post
Share on other sites

Hello Guys, Chris@Apple Roof Cleaning Tampa here  :)

If you lived here in Florida, you would know we have been softwashing down here for many many years!

A "softwash system" is what we have been using to chemically clean roofs and exteriors w/o pressure washing, for many years.

In this forum, you will learn how to build your very own softwash systems, and how to roll your own softwashing chemicals.

There is no need to buy expensive,, pre fabricated softwash skids, when you can easily build your very own softwash system.

You do not need  questionable, and very expensive softwash chemicals for your systems.

 

post-1-0-92838900-1370593180_thumb.png

 

Before you buy any ready made Softwash System, or "training", post any and all your soft wash cleaning questions here, so we may help you build your own system, and do it yourself.

post-1-0-57434700-1370593560_thumb.jpg

blogentry-1-0-56431900-1366330093_thumb.
blogentry-1-0-22163900-1366330134_thumb.

 

 

 

 

Great Job!  Thank you, Chris, for opening the conversation.  Too often, I have the chance to help others that have paid many thousands on 'junk that was never manufactured for use with any soft wash chemicals.

Share this post


Link to post
Share on other sites

Hello Guys, Chris@Apple Roof Cleaning Tampa here  :)

If you lived here in Florida, you would know we have been softwashing down here for many many years!

A "softwash system" is what we have been using to chemically clean roofs and exteriors w/o pressure washing, for many years.

In this forum, you will learn how to build your very own softwash systems, and how to roll your own softwashing chemicals.

There is no need to buy expensive,, pre fabricated softwash skids, when you can easily build your very own softwash system.

You do not need  questionable, and very expensive softwash chemicals for your systems.

 

post-1-0-92838900-1370593180_thumb.png

 

Before you buy any ready made Softwash System, or "training", post any and all your soft wash cleaning questions here, so we may help you build your own system, and do it yourself.

post-1-0-57434700-1370593560_thumb.jpg

blogentry-1-0-56431900-1366330093_thumb.
blogentry-1-0-22163900-1366330134_thumb.

 

 

 

 

Great Job!  Thank you, Chris, for opening the conversation.  Too often, I have the chance to help others that have paid many thousands on 'junk that was never manufactured for use with any soft wash chemicals.

Share this post


Link to post
Share on other sites

A lot of members use this nozzle for spraying roof mix. It is guaranteed for life and will increase your shooting distance on most rigs if set up correctly. They are pricey (around $50.00), but well worth it. They go from closed to totally  open in 1/2 turn. NO more changing tips aloft, and dropping them.

I wonder how well they would work using a Yamada 1/2" pump with an Eaton 9 h.p. 20 cfm air compressor... with 5/8" chem line... ???

I like the idea using one nozzle if at all possible... Thumbs up if it works... !!!

Share this post


Link to post
Share on other sites
Steve@Gm   

Old thread, but it looks like I'll be keeping it alive for now, lol.

I'm looking into putting together a small softwash system. I'd like to use my existing compressor, which is a rolair 9hp 175psi 20cfm unit, and just buy an air diaphragm system that I can plug my airline into and go. I saw the Outlaw-Mini and it seemed to be exactly what I'm looking for, but it also did not seem like it was getting a lot of distance. I'm not necessarily looking for a big $4k setup at the moment, as the season for this line of work is closing soon in my region (Illinois), but I do have existing customers that I have done other work for inquire about this service and they are looking to have it done soon so I figured I'll get something small started now and build it bigger for next year if it's not enough. Thoughts?

Share this post


Link to post
Share on other sites
13 hours ago, Steve@Gm said:

Old thread, but it looks like I'll be keeping it alive for now, lol.

I'm looking into putting together a small softwash system. I'd like to use my existing compressor, which is a rolair 9hp 175psi 20cfm unit, and just buy an air diaphragm system that I can plug my airline into and go. I saw the Outlaw-Mini and it seemed to be exactly what I'm looking for, but it also did not seem like it was getting a lot of distance. I'm not necessarily looking for a big $4k setup at the moment, as the season for this line of work is closing soon in my region (Illinois), but I do have existing customers that I have done other work for inquire about this service and they are looking to have it done soon so I figured I'll get something small started now and build it bigger for next year if it's not enough. Thoughts?

Welcome Steve! 

That Rol Air is a good compressor, and will power a 1/2 to 3/4 inch pump just fine. A pump made out of Kynar has several advantages over one made from Poly, but costs more. Poly can be used, but needs to be rinsed out right away, Kynar never needs to be rinsed. Plus, Kynar is UV Resistant, and Poly is not. 

Share this post


Link to post
Share on other sites
14 hours ago, Shawn Baker said:

I was recommended here to learn how to roof wash. How does one go about the learning process so I can offer this great service to my customers?

Read, read, and then read some more. If you have any questions about cleaning roofs, post them on the forum, and we will answer.

Share this post


Link to post
Share on other sites
On 6/7/2013 at 11:28 PM, Roof Cleaning Katy Texas said:

I have no problem with high price roof cleaning rigs, so long as you build it yourself.  I lean towards buying the Cadillac of roof cleaning and power washing products.  That is because well constructed components usually last longer.  Time is money and don't think it does not matter.  When I am cleaning a large roof the last thing I need or want is an equipment failure.  When something goes wrong with your roof cleaning system while you are on a job you want it fixed quickly.  If you build it yourself then you understand the design and how to fix it quickly.  If you buy a system made by somebody else and it quits working, Good Luck!.  You could be there all day just trying to figure out what the problem is let alone trying to fix it.  That will make you look very unprofessional in the eyes of a customer.  If you do professional work you are lucky to get 1 or more referrals.  I you break down and can not fix the problem in a timely manner you will look unprofessional and you will get lots of referrals...That is the kind of referrals that you do not want other potential customers hearing about.  My advice.  Start simple and understand what you have built.  Later on build your own more elaborate roof cleaning system.

Chris Tucker spent countless hours teaching me.  I continue to learn and ask for feedback every single day as we continue to evolve to suit the needs of the softwashers.  

These guys are right.  Keep these systems as simple as you possibly can.  Don’t give the distributors more $$.  It will lead to a complex system with complex issues to diagnose and expensive repairs.

Should you need 12 volt pumps, All-Flo AODD pumps, hose, plumbing components or an entire package shipped to you so that you can do your own custom installation, let me know.  We can help you.  I can help you find SH for a better price in your area.

The RCIA is the organization that you absolutely should join and pay the membership fee.  It is the only org that gives waaay more than the fee provide.  Everyone bends over backwards to help you learn providing you read, read and read some more.

We can cut and crimp suction/supply side hoses for sealed tank systems.  Just let me know how long, hose ID, hose ends and types.

8FFD0C41-1CE6-41F7-9CDF-E5F195D53113.jpeg

498CBEEA-0F42-4E85-9EBC-30E8CDF7A862.jpeg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×