Slo Mo Softwash Surfactant is the BEST!


12 posts in this topic

Posted

Buy Slo Mo Surfactant Here

Hello All!

The feedback keeps coming in and EVERYONE LOVES Slo Mo!  

Users report that they use 1/4 of the amount of surfactant compared to the rest of the surfactants.  Instead of using 1/2 gallon per 100 gallons of recipe, use only 16 ounces!

Doesn't leave a residue

Super thick and incredibly soapy thick

Cost Effective at $65 per 5 gallon bucket

This is not anything that we have carried in the past.  This surfactant is all new for PWP.

Buy Slo Mo Surfactant Here

 

Philip McCullough likes this

Share this post


Link to post
Share on other sites

Posted

Just ordered me a bucket the other day to try out.

Share this post


Link to post
Share on other sites

Posted

Let's hear about the results!

Share this post


Link to post
Share on other sites

Posted

For those whom use surfactants specifically for SH, at least try SLO MO SOFTWASH Surfactant one time!  We have only had positive feedback.  You need only 4 ounces per 50 gallons of recipe or 8 ounces per 100 gallons of recipe.  One 5 gallon bucket takes the place of 3-4 buckets of all other surfactants out there.  If you truly need a SH stable fragrance, go to the manufacturer and stop paying someone else to mix it in with your soap.  Go to Chemia, Horizon, Florachem or Nilum.  They will  send you free samples upon request.

Share this post


Link to post
Share on other sites

Posted

Great product!  I've been using it for about 4 months now.  20161111_095956.thumb.jpg.d0c51108cb6535

Share this post


Link to post
Share on other sites

Posted

Great product!  I've been using it for about 4 months now.  20161111_095956.thumb.jpg.d0c51108cb6535

Andrew, thank you for posting a pic of the Slo Mo in action as well as your opinion on the product.  We appreciate all of your feedback. 

Share this post


Link to post
Share on other sites

Posted

We love Slo-Mo for cleaning roofs in Savannah, GA  :-) 

I'm gonna be needing another 5GAL soon!

IMG_2028.jpg

Share this post


Link to post
Share on other sites

Posted

Excellent. I'm developing a new proportioning system and having a few hold backs with the pull on the third line. Not needing as much surfactant may very well be the cure.

Mike

Share this post


Link to post
Share on other sites

Posted

Excellent. I'm developing a new proportioning system and having a few hold backs with the pull on the third line. Not needing as much surfactant may very well be the cure.

Mike

Are all 3 lines exactly the same, with the same bends in each of them ? 

Share this post


Link to post
Share on other sites

Posted

Coastal1 - why run 3 inputs when two will do?  Maybe I'm missing something -   Unless you're using your roof cleaning pump for house washes as well?  That would explain it I guess.

Re: Slo Mo, I will be trying it at the beginning of our season.  Historically, we've used a locally procured surfactant, as it was more cost effective than specialty surfactants after shipping.  However; with this stuff working at a 1 quart to 100 gallon ratio, it IS cost effective even with shipping costs.  Looking forward to trying it, and hopefully buying a 55 gallon barrel after our trial run.

Share this post


Link to post
Share on other sites

Posted (edited)

Hey guys, thanks for the interest! Yes, my lines are exact duplicates of one another and with the exact same bends. Yes, I'm trying three inputs so the system can be used for spraying roofs along with siding.

I know I can simply combine the surfactant along with the sh however, I want a design for when I don't need a surfactant.

I'm almost certain my problem is trying to incorporate an emergency remote solenoid control valve in the system. When I first start the system, everything is fine however when I test the shut off solenoid I think too much back pressure is being applied to the surfactant port which is causing a restricted flow upon re-energizing the solenoid valve.

Mike

Edited by coastal1
Mis-spelled word

Share this post


Link to post
Share on other sites

Posted

Coastal1 - why run 3 inputs when two will do?  Maybe I'm missing something -   Unless you're using your roof cleaning pump for house washes as well?  That would explain it I guess.

Re: Slo Mo, I will be trying it at the beginning of our season.  Historically, we've used a locally procured surfactant, as it was more cost effective than specialty surfactants after shipping.  However; with this stuff working at a 1 quart to 100 gallon ratio, it IS cost effective even with shipping costs.  Looking forward to trying it, and hopefully buying a 55 gallon barrel after our trial run.

Sounds great!  However, you only need about 8 OUNCES and not a quart for the 100 gallon ratio mix!  The savings is incredible!  It is less expensive than dollar store gain or dawn dish soap. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now